Get complete information related to latest Lavatory Chute Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Lavatory Chute Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Lavatory Chute Tenders.
Tender For auction sale of rolling stock - condemned bg- 8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1) casnub bogie complete set with bolster assembly with brake gear items complete set (sl no 2,3,4,5&6only), 2)wheel set complete with axle,axle box and roller bearing assembly complete set-, 3)center buffer coupler complete set without draft gear and yoke. wagon nos: 1) er bcnm1 30028760761, 2) se boxnm1 10079560350 , 3) sc bcnm1 30099160095, 4) special repair bcnm1 30069003704, 5)er bcnm1 30029060822, 6)sr bcnm1 30069004787 . total 6 wagons, ds8 no:232876 dt: 05.03.2026. advicenote no 023280-25-20136 dt 05.03.2026. pl.no. 98110159, location: tondiarpet marshalling yard. custodian: sse - c and w - tnpm. remark ,1) rc items to be handed over to the custodian at specified location before final delivery.2)cutting permitted to loadable sizes only. 3) crane loading may be permitted. 4) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government 5) rate per number should be quoted, 6) purchaser should take safety precaution while cutting/delivery of wagons.
Tender For auction sale of depot ferrous scrap - 12265ms26b, 98050011, quantity- 41.295 mts. scrap condemned unserviceable ms bed plates, water tanks and water tank cut pieces, ms path plates, foot path plates, sheets, bin cut parts, rack and roller path, air tank cover parts, striker casting wear plates, sliding doors, swing doors, flap doors, ms chequered plates, expansion tank parts, ms plates, plate cuttings, wagon doors, dsl engine long hood, dummy bogie cut parts, cast iron surface plates and base plates, axle counter ms frames, baking oven cut pieces, ocb duct, welding machine outer body, inverter empty body, tap changer ms spares and empty body, manipulator, shaping machine ms body, ms gates, collapsible gates, base plate, short hood cabin cut parts, tables, racks, lavatorychute brackets, ms travelling base, ms danger boards, radiator ms spares, ms die blocks, ms body of radiator fan motor, capacitor ms body, auxiliary transformer ms empty body, ducts, dust bin stand, ht load brake switch body, ms transformer body, ventilator motor frames, transformer top plate, air receiver, storage box cut parts, coach body parts, dust bins, lockers, cattle guard, incinerator chimney parts, incinerator oven, incinerator cut parts, boxes, wagon doors cut pieces, wagon bfr end plates and cut pieces, ms fuel tanks [fire prone], boiler tank cut pieces, angles, girder, sheets cut pieces, pipe bending machine, lathe machine parts, transformer lifting trolley, lifting stands cut pieces, wagon damaged body sheet, floor sheets, pillar type jcb crane dismantled parts, loco lifting tackle assembly cut pieces, portable, jmb duct, stands, channels, fabricated structures, grinding machine body cut pieces cutting crane for utv, and other corroded heavy melting scrap of different thickness of sorts and sizes, with or without attachments. note- 1. gas cutting permitted for the purpose of loading only. 2. it is the responsibility of the purchaser to ensure that fuel tanks to be filled with water and cleaned thoroughly free from flammable substances before cutting to avoid explosion or any casualties. 3. private crane permitted for loading. special note- gas cutting for fuel tank should be done in open area [cutting must be kept clear and free of flammables] and away from bins [free from recognized hazards that are causing or are likely to cause serious harm] and should follow fire-prevention and fire-protection measures. location- [bin no- 265, left side of road no- 2]. hsn code- 72044900. gst- 18 percent. note- delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery as per mv act 1988
Tender For maintenance, repair & overhauling of components apart from diesel engine of 4 w and 8 w tower wagon of agra division of nc railway for a period of 24 months
Tender For auction sale of rolling stock - disposal of surplus diesel locomotive no. 14636 wdg3a of diesel loco shed, visakhapatnam. the age of the said loco is 27 years completed as on 21.10.2025. weight of the loco is 118.224 mt approximately. loco was in working condition when stable. (1) complete loco will be sold on as is where is basis. buyer should inspect the loco before bidding. (2) hsd oil, lube oil & other oil etc if found either to be returned to railways or an amount equivalent to the cost as advised by sr. dme/d/dls/vskp to be remitted to the railways. (3) the buyer if so desires can get the locomotive serviced overhauled in the diesel shed on payment. such repair will be carried out only after the locomotive has been sold to buyer and sale proceeds have been received, the cost of such repair will be worked out by sr. dme/d/dls/vskp in consultation with associate finance. (4) the delivery point will be diesel loco shed, visakhapatnam, however loco may be hauled to nearest feasible railway station on indian railways of buyers choice on payment of haulage charges as per rb rates circular no. 7 of 2022 dated 17.03.2022 as modified from time to time. hsn code is 72044900, gst @ 18 percent. wagon/coach/loco details:-
Tender For auction sale of rolling stock - lot no.ws/ayma/04/04/26-27/bg/cond./4w/8w/wgn. description- iron and steel scrap cutup parts of bg cond.4w/8w/wgn. without contents if any. 1) se 75079316598 bobsnm1 (nlb) 2) special repair 30069060806 bcnm1 (nlb) 3) er 72029562463 bobrnm1 (nlb) 4) er 72029564177 bobrnm1 (nlb) 5) nr 85039647471 bvzc 6) se 85079704141 bvzc 7) cr 85019660094 bvzc nb: (1): i) wagons are to be sold without 08 nos. nlb trolleys against special repairl. no. 01 to 04. ii) wagon serial no. 01 to 04 to be sold without 16 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower etc and other excluded fitting as per latest excluded fitting list. * iii) wagon serial no. 05 to 07 to be sold without 06 nos. r/b wheel sets, axle box cover plate, bg spring and brake gear with lever pull rod etc . as per latest fitting list. **( it contains no trolley ) *excluded fittings list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) delivery will be given in numbers.
Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.
Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.
Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)casnub bogie complete set with bolster assembly with brake gear items complete set (sl no 2,3,4&5 only)- 2)wheel set complete with axle,axle box and roller bearing assembly complete set-, 3)centre buffer coupler complete set excluding draft gear and yoke. wagon nos- 1) cr boxnr 25019660557, 2) cr bcnm1 30019060481 ,3 ) cr bcnm1 30019033218 , 4) special repair bcnm1 30069004305 ,5) special repair bcnm1 30069061681 = 5 wagons. advice note no 023280-25-20138 dt 05.03.2026 (232877 dt 05.03.2026) location: tondiarpet marshalling yard. custodian: sse - c and w - tnpm. pl.no.98110159, remark:1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.